本文へ移動

トーンアームスタンド

TAS-SSA
  • TAS-SSA トーンアームスタンド
  • TAS-SSA 外観全体
  • TAS-SSA 外観上面
  • TAS-SSA 外観底面シリアルナンバー
  • TAS-SSA ベースプレートφ31とφ41から選択可能(未研磨)
    • TAS-SSA トーンアームスタンド
    • TAS-SSA 外観全体
    • TAS-SSA 外観上面
    • TAS-SSA 外観底面シリアルナンバー
    • TAS-SSA ベースプレートφ31とφ41から選択可能(未研磨)

場所を選ばず、理想の音を実現する独立型トーンアームスタンド


TAS-SSAは、設置が難しいターンテーブルにも対応可能な独立型トーンアームスタンドです。
ターンテーブル外にトーンアームを設置することで、柔軟なレイアウトを実現します。

特集記事
TAS-SSA 外観IKEDAロゴ

安心の重量設計と異種素材の組み合わせ


アルミをステンレスで挟む高剛性構造により、不要な振動を徹底的に抑制。
重量感ある設計が安定性を高め、振動や共振を最小限にすることで、
クリアで引き締まった低域再生を可能にします。
TAS-SSA 使用例 レコードプレイヤー横に設置

お客様の理想に応えるカスタマイズ性


受注生産方式を採用し、
ベース取付穴のサイズは「φ31」またはIT-VTA-06取付用「φ41」からお選びいただけます。
また、完全オーダーの場合は高さも1mm単位でご指定いただけます。
TAS-SSA 使用例 2台設置
主な特徴

  • 異種金属の組み合わせ: ステンレスとアルミ、複数の金属を組み合わせることで共振を抑制。
  • 高剛性・高比重設計: 強く、重いだけではなく、不要な振動を徹底カット。
  • 柔軟なカスタマイズ対応: 高さ103mmをベースに特注対応も可能。


仕様

  • 高さ: 103mm
  • ベース取付穴寸法: φ31 または φ41(選択可能)
  • 重量: 最大3.15kg
  • 付属品: L型六角レンチ(3mm)1本
    ※本製品に回転台(アームベース)及びIT-VTA-06は含まれておりません。


    ~ TAS-SSA理想のオーディオシステム構築をサポート致します ~


TAS-SSA トーンアーム取付イメージ
以下、英語表記です。 / English text follows.
A standalone tonearm Stand that realizes the ideal sound, regardless of location.

The TAS-SSA is a standalone tonearm stand that can accommodate turntables with difficult installation requirements.
By placing the tonearm outside of the turntable, it enables a flexible layout.




A reassuringly heavy design and combination of different materials

A high-rigidity structure that sandwiches aluminum between stainless steel thoroughly suppresses unwanted vibrations.
The weighty design enhances stability and minimizes vibrations and resonance,
enabling clear and tight low-frequency reproduction.


Customizability that meets your ideal

We adopt a made-to-order production method,
and the base mounting hole size can be chosen from φ31 or φ41 for IT-VTA-06 mounting.
Additionally, for a fully customized order, the height can also be specified in 1mm increments.


Main Features

* Combination of different metals: Stainless steel and aluminum, combining multiple metals to suppress resonance.
* High-rigidity and high-density design: Not just strong and heavy, but thoroughly cuts out unwanted vibrations.
* Flexible customization: Based on a height of 103mm, special orders are also possible.


Specifications

Height: 103mm
Base Mounting Hole Diameter: φ31 or φ41 (selectable)
Weight: Up to 3.15kg
Accessories Included:
・L-Shaped Hex Wrench (3mm) ×1

Note: This product does not include the rotating base (arm base) or the IT-VTA-06.



"The TAS-SSA supports the construction of your ideal audio system."