IS-2TGL1
バフで磨き上げ金メッキを１μ施した
上質かつ剛性の高い特別なヘッドシェル
コネクター部分にチタン合金を採用し
特に振動・共振に優れ、アジマス調整も可能です。
アジマス調整用には
ステンレスM2キャップボルトのビスと
ステンレスM2.6六角穴付き止めネジで固定。
アースやノイズ対策も万全です。
仕様
本体材質 : アルミニウム合金
コネクタ : チタン合金削り出し
端子 : ロジウムメッキ
自重 : 17.5±1g（取付ビス除く）
付属リード : ISL-1（4N-OFCリッツ線 φ0.08mm×10×3本）
色 : ゴールド／ポリッシュ仕上げ）
アジマス : 前後調整50mm±1.5mm
付属 : L型レンチ棒2本（1.5/1.27）
止めネジ2set（2.6×7,10）
ナット1set
※止めネジとNは金めっき仕上げ
以下、英語表記です。 / English text follows.
A premium, high-rigidity special headshell
Buffed to a fine polish and finished with 1μ gold plating.
Buffed to a fine polish and finished with 1μ gold plating.
The connector features a precision-machined titanium alloy,
offering exceptional resistance to vibration and resonance, with full azimuth adjustment capability.
For azimuth tuning,
the shell is securely fastened using stainless M2 cap bolts and M2.6 hex socket set screws.
Grounding and noise suppression are also thoroughly addressed.
Specification
Body Material: Aluminum Alloy
Connector: Precision-Machined Titanium Alloy
Terminals: Rhodium-Plated
Net Weight: 17.5 ± 1g (excluding mounting screws)
Included Leads: ISL-1 (4N-OFC Litz Wire, φ0.08mm × 10 × 3 strands)
Finish: Gold / Polished
Azimuth Adjustment: 50mm ±1.5mm (front-to-back)
Accessories Included:
・L-Shaped Hex Wrenches ×2 (1.5 / 1.27mm)
・Mounting Screws ×2 sets (2.6×7mm, 2.6×10mm)
・Nut ×1 set
Note: Mounting screws and nut are finished with gold plating.
Connector: Precision-Machined Titanium Alloy
Terminals: Rhodium-Plated
Net Weight: 17.5 ± 1g (excluding mounting screws)
Included Leads: ISL-1 (4N-OFC Litz Wire, φ0.08mm × 10 × 3 strands)
Finish: Gold / Polished
Azimuth Adjustment: 50mm ±1.5mm (front-to-back)
Accessories Included:
・L-Shaped Hex Wrenches ×2 (1.5 / 1.27mm)
・Mounting Screws ×2 sets (2.6×7mm, 2.6×10mm)
・Nut ×1 set
Note: Mounting screws and nut are finished with gold plating.
