本文へ移動

ヘッドシェル

IS-2TW
  • ヘッドシェルIS-2TW
  • Headshell IS-2TW 右側
  • Headshell IS-2TW 表面
  • Headshell IS-2TW コネクター側
  • Headshell IS-2TW 裏面
  • Headshell IS-2TW
    • ヘッドシェルIS-2TW
    • Headshell IS-2TW 右側
    • Headshell IS-2TW 表面
    • Headshell IS-2TW コネクター側
    • Headshell IS-2TW 裏面
    • Headshell IS-2TW
アルミニウム合金を精密に削り出し加工した剛性の高い
エントリーモデルよりステップアップしたヘッドシェル

コネクター部分にチタン合金を採用し、
特に振動・共振に優れ、アジマス調整も可能です。

アジマス調整用には
ステンレスM2キャップボルトのビスと、
ステンレスM2.6六角穴付き止めネジで固定。
アースやノイズ対策も万全です。
Headshell-IS-2TW
仕様

本体材質 : アルミニウム合金
コネクタ : チタン合金削り出し
端子 : ロジウムメッキ
自重 : 17±1g(取付ビス除く)
付属リード : ISL-2(6N-OFC 純度99.9999% φ0.12mm×7本)
色 : シルバー/梨地仕上げ/白アルマイト
アジマス : 前後調整50mm±1.5mm
付属 : L型レンチ棒2本(1.5/1.27)
   止めネジ2set(2.6×7,10)
   ナット1set
Headshell IS-2TW Front
High-rigidity headshell machined from aluminum alloy with high precision, a step up from the entry model.

The connector part is made of titanium alloy, which excels in vibration and resonance, and allows for azimuth adjustment.

For azimuth adjustment, it is fixed with a stainless steel M2 cap bolt screw and a stainless steel M2.6 hexagon socket set screw.
Earthing and noise countermeasures are also complete.
Specification

Main Body Material: Aluminum Alloy
Connector: Titanium Alloy Machining
Terminal: Rhodium Plating
Weight: 17±1g (excluding mounting screws)
Attached Lead: ISL-2 (6N-OFC Purity 99.9999% φ0.12mm×7)
Color: Silver / Pear Skin Finish / White Anodized
Azimuth: Front and rear adjustment 50mm±1.5mm
Accessories: L-type wrench rod 2 pieces (1.5/1.27)
Stop screw 2 sets (2.6×7,10)
Nut 1 set