IS-2TB
アルミニウム合金を精密に削り出し、バフで磨き上げた剛性の高い
エントリーモデルよりステップアップしたブラックヘッドシェル
コネクター部分にチタン合金を採用し、
特に振動・共振に優れ、アジマス調整も可能です。
アジマス調整用には
ステンレスM2キャップボルトのビスと、
ステンレスM2.6六角穴付き止めネジで固定。
アースやノイズ対策も万全です。
コネクター部分にチタン合金を採用し、
特に振動・共振に優れ、アジマス調整も可能です。
アジマス調整用には
ステンレスM2キャップボルトのビスと、
ステンレスM2.6六角穴付き止めネジで固定。
アースやノイズ対策も万全です。
仕様
本体材質 : アルミニウム合金
コネクタ : チタン合金削り出し
端子 : ロジウムメッキ
自重 : 17±1g(取付ビス除く)
付属リード : ISL-2(6N-OFC 純度99.9999% φ0.12mm×7本)
色 : 艶有ブラック/ポリッシュ仕上げ/黒アルマイト
アジマス : 前後調整50mm±1.5mm
付属 : L型レンチ棒2本(1.5/1.27)
止めネジ2set(2.6×7,10)
ナット1set
以下、英語表記です。 / English text follows.
A high-rigidity black headshell, precisely machined from aluminum alloy and buffed to a fine polish
—a step up from the entry-level model.
The connector part is made of titanium alloy, which excels in vibration and resonance, and allows for azimuth adjustment.
For azimuth adjustment, it is fixed with a stainless steel M2 cap bolt screw and a stainless steel M2.6 hexagon socket set screw.
Earthing and noise countermeasures are also complete.
—a step up from the entry-level model.
The connector part is made of titanium alloy, which excels in vibration and resonance, and allows for azimuth adjustment.
For azimuth adjustment, it is fixed with a stainless steel M2 cap bolt screw and a stainless steel M2.6 hexagon socket set screw.
Earthing and noise countermeasures are also complete.
Specification
Body Material: Aluminum Alloy
Connector: Precision-Machined Titanium Alloy
Terminals: Rhodium-Plated
Net Weight: 17±1g (excluding mounting screws)
Included Leads: ISL-2 (6N-OFC, 99.9999% purity, φ0.12mm × 7 strands)
Finish: Gloss Black / Polished Surface / Black Anodized
Azimuth Adjustment: 50mm ±1.5mm (front-to-back)
Accessories Included:
・L-Shaped Hex Wrenches ×2 (1.5 / 1.27mm)
・Mounting Screws ×2 sets (2.6×7mm, 2.6×10mm)
・Nuts ×1 set
Connector: Precision-Machined Titanium Alloy
Terminals: Rhodium-Plated
Net Weight: 17±1g (excluding mounting screws)
Included Leads: ISL-2 (6N-OFC, 99.9999% purity, φ0.12mm × 7 strands)
Finish: Gloss Black / Polished Surface / Black Anodized
Azimuth Adjustment: 50mm ±1.5mm (front-to-back)
Accessories Included:
・L-Shaped Hex Wrenches ×2 (1.5 / 1.27mm)
・Mounting Screws ×2 sets (2.6×7mm, 2.6×10mm)
・Nuts ×1 set
