IS-2TCR1
バフで磨き上げ、クロームめっきを施した重厚で剛性の高い
IKEDAの顔ともいえる代表的なヘッドシェル
コネクター部分にチタン合金を採用し、
特に振動・共振に優れ、アジマス調整も可能です。
アジマス調整用には
ステンレスM2キャップボルトのビスと、
ステンレスM2.6六角穴付き止めネジで固定。
アースやノイズ対策も万全です。
コネクター部分にチタン合金を採用し、
特に振動・共振に優れ、アジマス調整も可能です。
アジマス調整用には
ステンレスM2キャップボルトのビスと、
ステンレスM2.6六角穴付き止めネジで固定。
アースやノイズ対策も万全です。
仕様
本体材質 : アルミニウム合金
コネクタ : チタン合金削り出し
端子 : ロジウムメッキ
自重 : 17.5±0.5g(取付ビス除く)
付属リード : ISL-1(4N-OFCリッツ線 φ0.08mm×10×3本)
色 : シルバー/ポリッシュ仕上げ/クロームめっき
アジマス : 前後調整50mm±1.5mm
付属 : L型レンチ棒2本(1.5/1.27)
止めネジ2set(2.6×7,10)
ナット1set
以下、英語表記です。 / English text follows.
A bold and rigid signature headshell that embodies the IKEDA identity
buffed to a high shine and finished with a lustrous chrome plating.
buffed to a high shine and finished with a lustrous chrome plating.
The connector features a titanium alloy construction,
offering exceptional resistance to vibration and resonance, with azimuth adjustment capability.
For azimuth adjustment,
the unit is equipped with stainless M2 cap bolts and M2.6 hex socket set screws for secure fastening.
Grounding and noise suppression are also thoroughly addressed.
Specification
Main Body Material: Aluminum Alloy
Connector: Titanium Alloy Machining
Terminal: Rhodium Plating
Weight: 17.5±0.5g (excluding mounting screws)
Attached Lead: ISL-1 (4N-OFC Litz wire φ0.08mm×10×3)
Color: Silver / Polished Finish / Chrome Plating
Azimuth: Front and rear adjustment 50mm±1.5mm
Accessories: L-type wrench rod 2 pieces (1.5/1.27)
Stop screw 2 sets (2.6×7,10)
Nut 1 set
